Skip to Content
Over 3,500 waterjet references in our catalogue
Compatible with FLOW, KMT, OMAX, BFT and ALLFI
Shipped from Madrid worldwide
Technical advice by phone

Prices are shown to registered customers. Sign in or request your access.

  1. Products
  2. Waterjet
  3. HP Tubbing & Fittings
  4. Nipples

Nipples

Public web pricelist
Sort By: Best sellers
Per page: 20

Nipples

NIPPLE;3/8 IN;60 KSI;STD;6 IN LG
Ref. A-0782-6
In stock · 24 h
Price on request
Quote
TUBE Assy;87 KSI;3 / 8 IN
Ref. 046562-197
On request
Price on request
Quote
Assy, Nipple & Plug, A-Jet, Tilt, Tested
Ref. 308639
In stock · 24 h
Price on request
Quote
HP Tubing 3/8" 60 K. 310 mm conical and threaded
Ref. 558486
In stock · 24 h
Price on request
Quote
Nipple tube 1/4" L= 49 cm
Ref. A-0781-19,30
In stock · 24 h
Price on request
Quote
Tube Assy 3/8" Straight 7.4" LG
Ref. 013345-7.4
Alt.: WF334574, A-803802-0187
On request
Price on request
Quote
Nipple tube 1/4" L=60mm
Ref. A-0781-60 mm
On request
Price on request
Quote
1/4" Nipple 540 mm
Ref. 12789
On request
Price on request
Quote
Tube Assy; 87 KSI; 3/8 in; STR; 12 in LG
Ref. 013345-12
On request
Price on request
Quote
1/4" Nipple 516 mm
Ref. 300037
Alt.: RB300037, 103405
On request
Price on request
Quote
1/4" Nipple,Long 1905 mm
Ref. 8553884292
On request
Price on request
Quote
252" Long 87K Tube Assy; 3/8"
Ref. 013345-252
On request
Price on request
Quote
3/8" Nipple, 150 cm Long 94 K
Ref. 12097
On request
Price on request
Quote
3/8" Nipple, 185 mm Long 94 K
Ref. RK12401
On request
Price on request
Quote
3/8" Nipple, 49" Long 1240 mm
Ref. A-0782-49
Alt.: 11717
On request
Price on request
Quote
3/8" Nipple, 6" Long
Ref. 13168-60-6-6
Alt.: 1-WJN6600600, 11563
On request
Price on request
Quote
3/8" Nipple, 7" Long
Ref. WJN6600700
Alt.: 105353
On request
Price on request
Quote
3/8"Nipple X 111"
Ref. 301337-111
On request
Price on request
Quote
3/8"Nipple X 1200 mm (94 K)
Ref. 301337-1200
On request
Price on request
Quote
3/8"Nipple X 4"
Ref. 301337-4
On request
Price on request
Quote

High-pressure nipples and connection adapters for waterjet circuits, in the usual diameters and thread combinations.

A nipple is a small part with a demanding job: it holds the joint at full working pressure, and the seal is made by the cone, not by the thread. That is why the cone has to be clean and undamaged, and why a nipple that has been over-tightened or re-used too many times should be replaced rather than re-fitted.

What identifies the part you need is the tube diameter at each end, the thread and the working pressure. If you have the old nipple, those figures can be measured from it directly.